
The AP Volution S Shade Key is a comprehensive system
of five Shade Guides, featuring four translucency levels,
plus Bleach and Stump Shade.
It enables the technician to evaluate the patient's stump shade and select the most appropriate ingot translucency and shade for a predictable, natural-looking restoration.
Handmade from the same lithium disilicate ceramic at crown thickness, it provides dentists and technicians with a reliable reference to evaluate shade before pressing.
The APVolution S Shade Key is included at no additional cost with a single order of $3,000 or more in APVolution S press ingots.
The Shade Key is currently out of stock but will be available again soon. Call us to reserve yours.
For questions or assistance, contact us at (727) 493-4062.
Efficiency through Simplicity.


Go here to see our AP Volution S ingots:
Shade Selection & System Overview
HT Shade:
This material shows a high translucency level to cover stump shades with no discoloration.
Indication: In order to get a natural looking crown, the HT ingots can be used for the press and stain technique. The overall appearance will be a natural translucent looking crown.
The HT+ ingots are designed for thin veneers or inlay only restorations offering a maximum of translucency.
MT Shade:
This material shows a medium opacity level to cover stump shades with mild discolorations.
Indication: In order to get a natural looking crown, the MT ingots can be used for the press/cut back and layering technique, or press and stain technique. It depends on the visual evaluation of the technician, which technique will be applied.
LT Shade: This material shows a more opaque porcelain, which can cover dark stump shades or certain discolorations.
Indication: In order to get a natural looking crown, the LT ingots can be used for the press/cut back and layering technique. The additional transparent layer, will give the crown the life like appearance, yet the core material will ensure the chroma needed to match the shade.
BLEACH Shade:
This material shows a more opaque porcelain, which can cover dark stump shades or certain discolorations.
Indication: In order to get a natural looking crown, the LT ingots can be used for the press/cut back and layering technique. The additional transparent layer, will give the crown the life like appearance, yet the core material will ensure the chroma needed to match the shade.
STUMP Shade:
The stump shades are made in a shape to match the concavity of the APColor Key Shade Guide indicators.
In order to get the best possible light transmission, a thin film of Vaseline can be applied onto the Stump Shade indicator to ensure a best possible light transmission into the porcelain indicator.



